30kg 0.1g commercial scale laboratory table balance

30kg 0.1g commercial scale laboratory table balance
1. House: Robust ABS
2. Interface: Rs232C (connect with Printer or PC)
3. Double LCD With Backlight
4. More functions about lab electronic balance: Counting, Full Range Tare, Over-Load Protection, Zero Tracking, Automatic Turn-Off, Under Weighing, Low Power Indicator
5. Value stable time: 2 s
6. Power: 100-240V/50HZ-60HZ
Model : WA-P
W&J Lab Electronic Balance Features:
Number
WA10P
WA20P
WA30P
WA101P
WA201P
WA251P
WA301P
Weighing (kg)
0-10
0-20
0-30
0-10
0-20
0-25
0-30
Division (g)
1/0.1
Repeatability (g)
<=1
<=1
<=1
<=0.1
<=0.2
<=0.2
<=0.2
Linearity (g)
<=1
<=1
<=1
<=0.2
<=0.2
<=0.2
<=0.2
Pan (mm)
310×225 
Display
LCD (Backlit)
Power
AC (230/115Vac ± 15%)/DC (Dry Battery Or Rechargeable Battery)
N. W. (kg)
3.5
G. W. (kg)
4
Outline (mm)
350×315×105
Packing
840×380×390mm/carton (with 4 pcs)
Knowledge of W&J lab electronic balance maintenance:
1. Place the balance on a stable workbench to avoid vibration, airflow, and sunlight.
2. Adjust the level bubble to the middle position before use.
3. The electronic balance should be preheated according to the instructions.
4. When weighing volatile and corrosive items, store them in a closed container to avoid corrosion and damage to the electronic balance.
5. The self-calibration or regular external calibration of the electronic balance is often carried out to ensure that it is in the best condition.
6. If the electronic lab electronic balance fails, it should be repaired in time, and it is not allowed to work with "illness".
7. Do not overload the operating balance to avoid damaging the balance.
8. If the electronic balance is not used for a long time, it should be stored temporarily.

评论

发表评论

此博客中的热门博文

Cleaning a Laboratory Balance

图片
  Cleaning a Laboratory Balance Laboratory Balance supplier  explains the procedure for cleaning a lab (bench top) balance (both analytical balance and precision balance). It is developed to advise laboratory employees on how to continue for extensive cleaning of a balance. The sanitation of a research  laboratory balance  can have a considerable effect on functional effectiveness and balance life time, in addition to customer safety and security. Cleansing Regulations-- Do's and also Do n'ts Make sure personnel are instructed on just how to clean balances. Inaccurate handling might trigger damages to the evaluating system or the electronics. First get rid of powder and also dirt, then sticky compounds. For powder and dust utilize a cells. Never ever impact; this could carry dirt or spilled sample products inside the balance. For elimination of sticky compounds, utilize a moist lint-free fabric as well as mild solvent (Isopropanol or Ethanol 70%); prevent unpleasant ...
阅读全文

Distinction Between an Analytical Balance and a Precision Balance

图片
  What is the difference between an   Analytical balance   and also a Precision Balance? There are numerous sorts of research laboratory balances offered to pick from. Each with various features and also recommendation for usage. Before acquiring an balance below are a few concerns to take into consideration when buying new lab devices. The application that will certainly be measured, the optimum ability required, as well as the precision needed. In today's article, we will be covering the distinctions between an analytical balance as well as an precision balance. Analytical balance Analytical balances have actually been made to determine tiny mass at wonderful accuracy. Usually utilized in quantitative chemical analysis, analytical balances are extremely sensitive and also are able to measure 4 decimal places to the right of the decimal point as well as with the ability of action samples as much as 320g. A logical balance is so delicate air currents can influence the mea...
阅读全文

The Weighing is always Inaccurate?

图片
  When the   0.01g lab electronic balance   used, the weighing is always inaccurate? Do you have a good analysis of what caused it? In general, there are many reasons for the inaccurate weighing of samples in laboratory analysis, which can be roughly divided into several reasons such as analytical balance calibration, installation, environmental and physical factors of the sample, and improper operation. 1.The Analytical Balance Has not Been Calibrated Before Use Before using an analytical balance, you must first confirm its correctness, otherwise the correctness of the balance cannot be guaranteed. Analytical balances should be calibrated regularly from the first use. Balances that are used continuously are calibrated approximately once a week. Calibration should be carried out in accordance with the specified procedures, and standard weights must be used for calibration, otherwise the calibration will not be effective. 2.Incorrect Installation of Analytical Balance When...
阅读全文